FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)
Messages
215Edge Switch 2/24 Service Manual
Cannot perform
operation. Fabric is
unknown.
This message displays if
no switches in the fabric
are connected to the
HAFM appliance.
Ensure at least one
fabric-attached switch or
director has an Ethernet
connection to the HAFM
appliance and retry the
operation.
Cannot perform
operation. The list of
attached nodes is
unavailable.
This message displays
when attached nodes are
unavailable and the user
attempts to modify a
zone or create a new
zone.
Verify an attached node is
available and retry the
operation.
Cannot retrieve current
SNMP configuration.
The current SNMP
configuration could not
be retrieved.
Try again. If the problem
persists, contact the next
level of support.
Cannot save current
SNMP configuration.
The current SNMP
configuration could not
be saved.
Try again. If the problem
persists, contact the next
level of support.
Cannot set write
authorization without
defining a community
name.
An SNMP community
name is not configured.
Enter a valid community
name in the Configure
SNMP dialog box.
Cannot show zoning
library. No fabric exists.
The user cannot show the
zoning library if no fabric
exists. A Director or Edge
Switch must be identified
to the
HAFM
application
for a fabric to exist.
Identify a Director or Edge
Switch to the
HAFM
application from the New
Product dialog box.
Click OK to remove all
contents from log.
This action deletes all
contents from the selected
log.
Click OK to delete the log
contents or Cancel to
cancel the operation.
Connection to HAFM
appliance lost.
The connection to the
remote HAFM appliance
was lost.
Log in to the HAFM
appliance again through
the HAFM Login dialog
box.
Connection to HAFM
appliance lost. Click OK
to exit application.
The
HAFM
application at
a remote workstation lost
the network connection to
the HAFM appliance.
Start the
HAFM
application
to connect to the HAFM
appliance.
Table 29: HAFM application messages (Continued)
Message Description Action