24 Service Manual (AA-RTDXC-TE, July 2004)

Repair Information

186 Edge Switch 2/24 Service Manual

b. Delete the icon representing the reset switch. At the HAFM application,

choose Discover > Setup. The Discover Setup dialog box displays, as

shown in Figure 52.

c. Highlight the entry representing the reset switch in the Available

Addresses window and click Remove.

d. At the Discover Setup dialog box, click OK. The switch is no longer

defined to the management server.

e. Change a switch’s IP address through the maintenance port at the rear of

the switch. Refer to the HP StorageWorks Edge Switch 2/24 Installation

Guide for information on configuring switch network information.

f. Identify the switch to the HAFM application. Refer to the HP

StorageWorks Edge Switch 2/24 Installation Guide for information on

identifying the switch to the HAFM application

g. Switch-to-HAFM appliance communication is restored and the procedure

is complete.