24 Service Manual (AA-RTDXC-TE, July 2004)

Repair Information

185Edge Switch 2/24 Service Manual

c. At the HAFM application, choose Discover > Setup. The Discover Setup

dialog box displays, as shown in Figure 52.

Figure 52: Discover Setup dialog box

d. Highlight the entry representing the reset switch in the Available

Addresses window and click Change. The Domain Information dialog

box displays, as shown in Figure 53.

Figure 53: Domain Information dialog box

e. Enter 10.1.1.10 in the IP Address field and click OK. Entries at the

Discover Setup dialog box reflect the new IP address.

f. At the Discover Setup dialog box, click OK. switch-to-HAFM appliance

communication is restored and the procedure is complete.

10. Change the switch IP address and restart the HAFM appliance session as

follows:

a. A gray square with a yellow exclamation mark displays adjacent to the

icon representing the reset switch, indicating switch is not communicating

with the HAFM appliance.