24 Service Manual (AA-RTDXC-TE, July 2004)

Repair Information

169Edge Switch 2/24 Service Manual

Switch IML

To IML the switch from the front panel:

1. Press and hold the IML/RESET button until the amber ERR LED blinks at

twice the unit beaconing rate (approximately three seconds).

2. Release the button to IML the switch. During the IML, the switch-to-HAFM

appliance Ethernet link drops momentarily and the following occur at the

Hardware View:

— As the network connection drops, the status table turns yellow, the Status

field displays No Link, and the State field displays Link Timeout.

— The status bar at the bottom of the window displays a grey square,

indicating that the switch status is unknown.

— Illustrated FRUs disappear, and appear again, as the connection is

re-established.

Switch IPL

To IPL the switch from the HAFM appliance (Edge Switch 2/24 Element

Manager application):

3. Open the HAFM application. The View All - HAFM 8 main window displays.

4. Double-click the icon representing the switch requiring an IPL. The

Hardware View for the selected switch displays.

5. Choose Maintenance > IPL. The Information dialog box displays.

6. Click Yes to IPL the switch. During the IPL, the switch-to-HAFM appliance

Ethernet link drops momentarily and the following occur at the Hardware

View:

— As the network connection drops, the status table turns yellow, the Status

field displays No Link, and the State field displays Link Timeout.

— The status bar at the bottom of the window displays a grey square,

indicating switch status is unknown.

— Illustrated FRUs disappear, and appear again as the connection is

re-established.