24 Service Manual (AA-RTDXC-TE, July 2004)

Repair Information

162 Edge Switch 2/24 Service Manual

14. Remove the loopback plug and reconnect the fiber-optic jumper cable from

the device to the port.

15. Reset the port:

a. At the Hardware View, right-click the port graphic. A pop-up menu

displays.

b. Click the Reset Port option. A message box displays, indicating a link

reset operation will occur.

c. Click OK. The port resets.

16. Notify the customer the test is complete and the device can be reconnected to

the switch and set online.