24 Service Manual (AA-RTDXC-TE, July 2004)

Repair Information

142 Edge Switch 2/24 Service Manual

Factory Defaults

Table 21 lists the defaults for the passwords, and IP, subnet, and gateway

addresses.

Procedural Notes

Note: HAFM and Element Manager screens in this manual may not match the screens

on your server and workstation. The title bars have been removed and the fields may

contain data that does not match the data seen on your system.

The following procedural notes are referenced in applicable repair procedures.

The notes do not necessarily apply to all procedures in the chapter.

1. Before performing a repair procedure, read the procedure carefully and

thoroughly to familiarize yourself with the information and reduce the

possibility of problems or customer down time.

2. When performing procedures described in this chapter, heed all WARNING

and CAUTION statements, and other statements listed in the preface of this

manual.

3. After completing steps of a detailed procedure that is referenced from another

procedure, return to the initial (referencing) procedure and continue to the

next step of that procedure.

Table 21: Factory-Set Defaults

Item Default

Customer password password

Maintenance password level-2

IP address 10.1.1.10

Subnet mask 255.0.0.0

Gateway address 0.0.0.0