24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

124 Edge Switch 2/24 Service Manual

Did the corrective action solve the problem and relieve the reported low

BB_Credit condition?

NO YES

↓ The ISL appears operational. Exit MAP.

Contact the next level of support. Exit MAP.

A 150 event code indicates a zone merge process failed during ISL initialization.

Either an incompatible zone set was detected or a problem occurred during

delivery of a zone merge frame. This event code always precedes a 070 event

code, and represents the reply of an adjacent fabric element in response to a zone

merge frame.

Obtain supplementary event data for each 150 event code.

1. At the Hardware View, click Logs > Event Log. The Event Log displays.

2. Examine the first 12 bytes (0 through 11) of event data.

3. Bytes 0 through 3 specify the E_Port number (00 through 23) reporting the

problem. Bytes 8 through 11 specify the failure reason as specified in

Table 20.

A zone merge process failed during ISL initialization. The following list explains

the reason:

■ Failure reason 01–An invalid data length condition caused an error in a zone

merge frame.

Table 18: Bytes 8 through 11 Failure Reasons and Actions

Bytes 8 - 11 Failure Reason Action

01 Invalid data length. Go to step 26.

08 Invalid zone set format. Go to step 26.

09 Invalid data. Go to step 27.

0A Cannot merge. Go to step 27.

F0 Retry limit reached. Go to step 26.

F1 Invalid response length. Go to step 26.

F2 Invalid response code. Go to step 26.