24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

117Edge Switch 2/24 Service Manual

Figure 30: Configure Fabric Parameters dialog box

5. Type the recommended E_D_TOV and R_A_TOV values, then click

Activate.

6. Repeat steps d and e at the Hardware View for the switch attached to the

segmented E_Port (second switch). Use the same E_D_TOV and R_A_TOV

values.

7. Set both switches online. Refer to “Set the Switch Online or Offline” on

page 174.

Did the operating parameter change solve the problem and did both switches join

through the ISL to form a fabric?

NO YES

↓ The switch, associated ISL, and multiswitch fabric appear

operational. Exit MAP.

Contact the next level of support. Exit MAP.

A switch E_Port segmented because two fabric elements had duplicate domain

IDs.

1. Work with the system administrator to determine the desired domain ID

(1 through 23 inclusive) for each switch.

2. Notify the customer both switches will be set offline. Ensure the system

administrator quiesces Fibre Channel frame traffic through the switches and

sets attached devices offline.

3. Set both switches offline. Refer to “Set the Switch Online or Offline” on

page 174.