FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Edge Switch 2/24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics
110 Edge Switch 2/24 Service Manual
Did the link incident recur?
YES NO
↓ The Fibre Channel link and switch appear operational. Exit MAP.
38
Disconnect the fiber-optic jumper cable from the switch port and connect the
cable to a spare port.
Is a link incident reported at the new port?
YES NO
↓ Go to step 40.
39
The attached device is causing the recurrent link incident. Notify the customer of
the problem and have the system administrator:
1. Inspect and verify operation of the attached device.
2. Repair the attached device if a failure is indicated.
3. Monitor port operation for approximately five minutes.
Did the link incident recur?
YES NO
↓ The attached device, Fibre Channel link, and switch appear
operational. Exit MAP.
Contact the next level of support. Exit MAP.
40
The switch port reporting the problem is causing the recurrent link incident. The
recurring link incident indicates port degradation and a possible pending failure.
Go to step 6.