24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

106 Edge Switch 2/24 Service Manual

Figure 27: Fabric Binding dialog box

2. At the Fabric List section, ensure the Enable/Disable check box is enabled

(checked) for the fabric containing both switches.

3. At the Membership List of <Fabric Name> section, update the membership

list for both elements to ensure interswitch compatibility, then click OK. The

fabric binding feature is consistently enabled for both switches.

Did updating the fabric membership lists solve the problem?

NO YES

↓ The switch appears operational. Exit MAP.

Contact the next level of support. Exit MAP.

A port connection is not allowed because of a switch binding mismatch. Switch

membership lists must be compatible for both fabric elements.

1. At the Hardware View for each switch, click Configure > Switch Binding >

Edit Membership List. The Switch Binding - Membership List dialog box

displays (Figure 28).