24 Service Manual (AA-RTDXC-TE, July 2004)

Diagnostics

105Edge Switch 2/24 Service Manual

Figure 26: Switch Binding - State Change dialog box

2. Ensure the Enable Switch Binding check box is enabled (checked) for both

switches.

3. Ensure the Connection Policy radio buttons are compatible for both switches.

4. Click Activate for each switch. The switch binding feature is consistently

enabled for both switches.

Did configuring the switch binding parameters solve the problem?

NO YES

↓ The switch appears operational. Exit MAP.

Contact the next level of support. Exit MAP.

A port connection is not allowed because of a fabric binding mismatch. Fabric

membership lists must be compatible for both fabric elements.

1. At the HAFM main window, click Configure > Fabric Binding. The Fabric

Binding dialog box displays (Figure 27).