24 Installation Guide (AA-RTDWC-TE, July 2004)

Using the Embedded Web Server

96 Edge Switch 2/24 Installation Guide

Accessing the Embedded Web Server

A PC platform with LAN access and standard web browser running Netscape

Navigator 4.6 or later or Microsoft Internet Explorer 4.0 or later is required.

To open the Embedded Web Server interface:

1. Ensure that the browser-capable PC and the Ethernet LAN segment (with the

switch attached) are connected.

2. At the PC, launch the browser application (Netscape Navigator

or Internet

Explorer).

3. At the browser, enter the IP address of the switch as the Internet uniform

resource locator (URL). Use the default IP address of 10.1.1.10, the factory

preset of 10.1.1.10, or the IP address configured while performing “Configure

Switch Network Information” on page 53. The Username and Password

Required dialog box displays, as shown in Figure 36.

Figure 36: Username and Password Required dialog box

4. Enter the default user name and password.

Note: The default user name is

Administrator

and the default password is

password

The user name and password are case-sensitive.