24 Installation Guide (AA-RTDWC-TE, July 2004)

Installing and Configuring the Edge Switch 2/24

93Edge Switch 2/24 Installation Guide

Using HAFM from a Remote Location

Use this section to install the HAFM client on a remote workstation.

Remote Workstation Minimum Requirements

The minimum requirements described in “Minimum Remote Workstation

Requirements” on page 29 must be met to install HAFM on a remote workstation.

Note: For HAFM to function properly, compatible versions must be installed on both

the client machines and the HAFM appliance.

Install HAFM Client on a Remote Workstation

Use these steps to install HAFM on a remote client:

1. Verify that the workstation and the Ethernet LAN segment (with the Edge

Switch 2/24 attached) are connected through the Internet.

2. At the workstation, launch the browser application.

3. At the browser, enter the HAFM appliance IP address.

4. The HAFM splash screen displays with the following options, see Figure 35.

a. Install HAFM remote client application—Choose this option to install

the application for your workstation platform.

b. Download SNMP MIB files—The Management Information Base

(MIB) files are provided in standard ASN.1 syntax and may be installed

into the MIB database of any SNMPv2-compliant Network Management

Station.