24 Installation Guide (AA-RTDWC-TE, July 2004)

Installing and Configuring the Edge Switch 2/24

91Edge Switch 2/24 Installation Guide

8. Double-click the port connector used to make this ISL connection to open the

Port Properties dialog box (Figure 34).

Figure 34: Port Properties dialog box

9. Ensure that the Link Incident field displays None and the Reason field is

blank. If an ISL segmentation or other problem is indicated, refer to the

HP StorageWorks Edge Switch 2/24 Service Manual to isolate the problem. If

no problems are indicated, installation tasks are complete.

Note: If the Open Trunking feature is installed an additional field (Congested

Threshold %) displays in the Port Properties dialog box. This field displays the active

congested threshold percentage currently configured in the Configure Open Trunking

dialog box.