24 Installation Guide (AA-RTDWC-TE, July 2004)

Installing and Configuring the Edge Switch 2/24

88 Edge Switch 2/24 Installation Guide

5. Choose Enable Call Home Event Notification to perform applicable tests.

The call home test provides a test notification message to a remote support

center. Depending on the option chosen during HAFM installation, the test

notification message is transmitted over telephone lines or LAN.

6. Click Send Test. Call-home and e-mail test messages are transmitted. Click

OK to close the dialog box.

7. Maximize the Hardware View.

8. At the Hardware View, select Enable Call Home Notification from the

Maintenance menu. A check mark displays a check box to indicate call-home

event notification for the switch is enabled, and the menu closes.

Back Up HAFM Configuration Data

It is important to back up the HAFM configuration data. This data is used to

restore the HAFM appliance See the HP StorageWorks Edge Switch 2/24 Service

Manual for instructions on backing up the HAFM configuration data.

Once the HAFM configuration data is backed up, go to “Connect Cables to Fibre

Channel Ports” on page 89.

Configure Open Systems Management Appliance

For complete procedures on configuring this optional feature, refer to HP

StorageWorks Edge Switch 2/24 Element Manager User Guide.

Configure Feature Key

For complete procedures on configuring this feature, refer to HP StorageWorks

Edge Switch 2/24 Element Manager User Guide.

Configure Open Trunking

This option is only available if the optional Open Trunking feature is installed.

Choosing this option opens the Configure Open Trunking dialog box. For details

on enabling Open Trunking and configuring such parameters as congestion

thresholds for ports, event notification options, and low BB credit threshold, refer

to HP StorageWorks Edge Switch 2/24 Element Manager User Guide.