24 Installation Guide (AA-RTDWC-TE, July 2004)

Installing and Configuring the Edge Switch 2/24

83Edge Switch 2/24 Installation Guide

2. Click New. The New Threshold Alert dialog box displays, as shown in

Figure 28.

Figure 28: New Threshold Alerts dialog box—first screen

3. Enter a name from one to 64 characters in length. All characters in the ISO

Latin-1 character set, excluding control characters, are allowed.

4. Choose one of the following from the drop-down list under the Name field:

■ Rx Throughput—An alert will occur if the threshold set for receive

throughput is reached

■ Tx Throughput—An alert will occur if the threshold set for transmit

throughput is reached.

■ Rx or Tx Throughput—An alert will occur if the threshold set for either

receive or transmit throughput is reached.

5. Click Next. A new screen displays with additional parameters, as shown in

Figure 29. The name configured for the alert displays at the top of the screen.

Note: Click Previous if you need to return to the previous screen.