24 Installation Guide (AA-RTDWC-TE, July 2004)

Installing and Configuring the Edge Switch 2/24

78 Edge Switch 2/24 Installation Guide

Figure 23: Configure SNMP dialog box—Enable Authorization Traps

3. Click Activate to save the information and close the dialog box.

Configure, Enable, and Test E-mail Notification

Perform this procedure to configure, enable, and test e-mail and simple mail

transfer protocol (SMTP) addresses to receive notification of switch (and other

product) events. Configure and test procedures are performed at the HAFM

appliance. E-mail notification is enabled for each switch at the HAFM

application.

To configure, enable, and test e-mail server addresses:

1. Minimize the Hardware View and return to the HAFM application.

2. At the HAFM application or EWS main window, choose Monitor > Event

Notification and E-mail options. The E-mail Event Notification Setup

dialog box displays (Figure 24).

Figure 24: Configure E-Mail dialog box