24 Installation Guide (AA-RTDWC-TE, July 2004)

Installing and Configuring the Edge Switch 2/24

59Edge Switch 2/24 Installation Guide

Configure the HAFM Appliance

To run HAFM software, you must set up and configure the HAFM appliance.

Refer to the HAFM appliance installation guide for instructions on:

■ Setting up the HAFM appliance.

■ Connecting the HAFM appliance to the LAN.

■ Configuring the network addressing for the HAFM appliance.

■ Setting HAFM appliance date and time.

■ Creating HAFM user names and passwords

Record or Verify HAFM appliance Restore Information

Configuration information must be recorded to restore the HAFM appliance in

case of hard drive failure. The Windows operating system and the HAFM

application must also be restored. Refer to the HP StorageWorks Edge Switch

2/24 Service Manual for instructions and configuration information.

Enabling HAFM to Manage the Switch

To manage a new switch, it must be identified to the HAFM appliance. To

identify the new switch:

At the HAFM application (Element manager or EWS main window), select

the Setup option from the Discover menu. The Discover Setup dialog box

disp

lays (Figure 13).

Figure 13: Discover Setup dialog box