24 Installation Guide (AA-RTDWC-TE, July 2004)

Installing and Configuring the Edge Switch 2/24

52 Edge Switch 2/24 Installation Guide

d. The green/blue and amber LEDs associated with Fibre Channel ports

blink momentarily while the ports are tested.

7. After successful POST completion, the green power (PWR) LED remains

ON and all other front panel LEDs turn OFF.

8. If a POST error or other malfunction occurs, refer to the HP StorageWorks

Edge Switch 2/24 Service Manual to isolate the problem.

9. Perform the following steps:

■ If you manage the switch through EWS, go to “Using the Embedded Web

Server” on page 95 to configure the switch.

■ If you manage the switch through HAFM, go to “Configure Switch

Network Information” on page 53.