24 Installation Guide (AA-RTDWC-TE, July 2004)

Switch Features

22 Edge Switch 2/24 Installation Guide

Figure 2 shows the front panel controls, connectors and indicators.

Figure 2: Edge Switch 2/24 front panel features

Power and System Error LEDs

The Power LED, as shown in Figure 2, illuminates when the switch is connected

to facility AC power and powered on. If the LED extinguishes, a facility power

source, power cord, or power distribution failure is indicated.

The Error LED, as shown in Figure 2, illuminates when the switch detects an

event requiring immediate operator attention, such as a FRU failure. The LED

remains illuminated as long as an event is active. The LED extinguishes when the

Clear System Error Light function is selected from the Product Manager

application.

The LED blinks if unit beaconing is enabled. An illuminated LED (indicating a

failure) takes precedence over unit beaconing. The LED also blinks (at twice the

beaconing rate) when the IML/RESET button is pressed and held for more than

three seconds.

1 Power LED (green)

2 Error LED (amber

3 Ethernet LAN connector

4 Initial machine load (IML) button

5 SFP fiber optic connectors

6 Port LEDs