24 Installation Guide (AA-RTDWC-TE, July 2004)

Using the Embedded Web Server

112 Edge Switch 2/24 Installation Guide

Configure User Rights

Perform this procedure to configure the administrator-level and operator-level

passwords used to access the Embedded Web Server interface through the

Username and Password Required dialog box.

To configure passwords:

1. Choose Configure > Security to display the User Rights tab as shown in

Figure 47.

Figure 47: Security page–User Rights tab

2. For the Administrator set of data fields:

a. Enter the administrator user name (as specified by the customer’s network

administrator) in the New User Name field. Use 16 or fewer

alphanumeric characters.

b. Enter the administrator password (as specified by the customer’s network

administrator) in the New Password field. Use 16 or fewer alphanumeric

characters.

c. Enter the administrator password again in the Confirm New Password

field,