24 Installation Guide (AA-RTDWC-TE, July 2004)

Using the Embedded Web Server

106 Edge Switch 2/24 Installation Guide

d. Select the Interop mode:

— McDATA Fabric 1.0. (default). Select this mode if the fabric contains

only M-series switches that are operating in McDATA Fabric 1.0

mode.

— Open Fabric 1.0. Select this mode if the fabric contains HP directors

and switches, as well as other open fabric-compliant switches. Select

this mode for managing heterogeneous fabrics.

5. Click Activate to save the information. The message Your changes to

the operating parameters configuration have been

successfully activated displays.

6. Set the switch online:

a. At the View window, select Operations at the left side of the panel. The

Operations panel opens with the Switch Beacon page displayed.

b. At the Operations panel, click the Online State tab, then click Set

Online. The message Your operations changes have been

successfully activated displays.