24 Installation Guide (AA-RTDWC-TE, July 2004)

Using the Embedded Web Server

104 Edge Switch 2/24 Installation Guide

5. Click Activate to save the information. The message “Your changes to

the Operating Parameters configuration have been

successfully activated” displays.

6. Set the switch online:

a. Choose Operations >Online State. The Operations page displays with

the Online State tab selected.

b. Click Set Online. The message “Your changes have been

successfully activated” displays.

Set Fabric Parameters

The switch must be set offline to configure fabric parameters. To configure the

parameters:

1. Set the switch offline as follows:

a. At the View window, select Operations at the left side of the panel. The

Operations panel opens with the Switch Beacon page displayed.

b. At the Current State window, click Set Offline. The message Your

operations changes have been successfully

activated displays.

2. At the View window, select Configure at the left side of the panel. The

Configure panel opens with the Ports page displayed.

3. At the Configure panel, click the Switch tab, then select Fabric Parameters.

The Switch page displays with Fabric Parameters.

4. Set the fabric parameters (Figure 42):.