24 Installation Guide (AA-RTDWC-TE, July 2004)

Using the Embedded Web Server

101Edge Switch 2/24 Installation Guide

Configure Date and Time

Perform this procedure to configure the effective date and time for the switch. To

set the date and time:

1. Choose Configure > Switch > Date/Time. The Switch page displays with a

highlighted red Date/Time tab selected (Figure 40).

Figure 40: Switch page—Date/Time tab

a. Click the Date fields that require change, and enter numbers in the

following ranges:

Month (MM): 1 through 12

Day (DD): 1 through 31

Year (YY): greater than 1980

b. Click the Time fields that require change, and enter numbers in the

following ranges:

Hour (HH): 0 through 23

Minute (MM): 0 through 59

Second (SS): 0 through 59

2. Click Activate to save the information. The message “Your changes to

the Date/Time configuration have been successfully

activated” displays.