24 Installation Guide (AA-RTDWE-TE, November 2005)

Table Of Contents

Edge Switch 2/24 installation guide 85

31-day grace period. Before grace period expiration, the application must be reactivated

through a PFE key.

• Flexport technology—A fexport technology product is delivered at a discount without all Fibre

Channel ports enabled. When additional port capacity is required, the remaining ports are

incrementally enabled through this feature.

• Full volatility—This feature ensures that no Fibre Channel frames are stored after the product is

powered off or fails and that a memory dump file (that possibly includes classified data frames)

is not included as part of the data collection procedure.

• OpenTrunking—This feature provides dynamic load balancing of Fibre Channel traffic across

multiple ISLs.

• SANtegrity Authentication—This feature enhances security in SANs by restricting access to Fibre

Channel elements (directors or fabric switches).

• SANtegrity Binding—This feature enhances security in SANs with a large and mixed group of

fabrics and attached devices.

After purchasing a feature, obtain the PFE key by following the enclosed instructions. The key is an

alphanumeric string consisting of uppercase and lowercase characters that must be entered exactly,

including dashes. An example format is:

XxXx-XXxX-xxXX-xX

Keys are encoded to work only with the serial number of the installed product. Record the key to

re-install the feature if required. If the product fails and is replaced, obtain new PFE keys from the

Hewlett-Packard Authorization Center web site: http://webkey.external.hp.com

. Have the serial

numbers of the failed and replacement products available. After obtaining a PFE key, install the

feature as follows:

1. Select Configure > Optional Features.