FW 08.01.00/HAFM SW 08.06.xx or later HP StorageWorks Edge Switch 2/24 Installation Guide (AA-RTDWE-TE, November 2005)
Table Of Contents
- Edge Switch 2/24 installation guide
- Contents
- Introduction to the Edge Switch 2/24
- Installing the Edge Switch
- Connecting the Edge Switch
- Edge Switch network addresses
- LAN-connecting the Edge Switch
- Setting up the HAFM appliance
- Using HAFM to configure the Edge Switch
- Setting the Edge Switch online and offline
- Configuring Edge Switch identification
- Configuring Edge Switch operating parameters
- Configuring fabric operating parameters
- Configuring switch binding
- Configuring preferred path
- Configuring ports
- Configuring SNMP trap message recipients
- Configuring, enabling, and testing e-mail notification
- Configuring and enabling call-home features
- Configuring and enabling Ethernet events
- Configuring, enabling, and testing call-home event notification
- Threshold alerts
- Creating new alerts
- Figure 30 Configure Threshold Alerts dialog box
- Figure 31 New Threshold Alerts dialog box-first screen
- Figure 32 New Threshold Alerts dialog box-second screen
- Figure 33 New Threshold Alerts dialog box-third screen
- Figure 34 New Threshold Alerts dialog box-summary screen
- Figure 35 Configure Threshold Alerts dialog box-alert activated
- Modifying alerts
- Activating or deactivating alerts
- Deleting alerts
- Creating new alerts
- Configuring SANtegrity Authentication
- Backing up HAFM configuration data
- Resetting configuration data
- Enabling the HAFM Basic interface
- Enabling Telnet
- Connecting the Edge Switch to a fabric
- Using the HAFM Basic interface
- Launching the HAFM Basic interface
- Setting the Edge Switch offline and online
- Configuring Edge Switch ports
- Configuring BB credit
- Configuring Edge Switch identification
- Configuring date and time
- Configuring Edge Switch parameters
- Configuring network information
- Configuring SNMP trap message recipients
- Enabling or disabling the CLI
- Configuring zoning
- Managing firmware versions
- Regulatory compliance and safety
- Technical specifications
- Index
Edge Switch 2/24 installation guide 125
NVRAM 43, 46
O
online state, setting 41
open fabric 1.0 interop mode 48
OpenTrunking
configure PFE key
HAFM Basic 85
operating parameters, default values 116
P
parts
proper handling 105
storing 105
transporting 105
password, default 115
PFE keys
configure 84
Element Manager application 84
Flexport technology 85
full-volatility 85
OpenTrunking 85
SANtegrity Authentication 85
SANtegrity Binding 85
port binding
configure 88
HAFM Basic 87
description 87, 88
enable
HAFM Basic 87
port fencing
configure 87
description 87
ports
blocked states, default value 116
cabling 40
default values 116
E_Port fencing 87
loopback diagnostic tests, fiber-optic
loopback plug 20
UDP, default value 116
power cord
compliance notice 104
current rating 104
replacement 104
set 104
voltage rating 104
power supplies
requirements 118
preferred domain ID
44
default value 116
preferred path
configure 87
description 87
prerequisites 9
preventing electrostatic damage 105
principal switch, determining 47
priority, default value 116
ProComm Plus 21
protective plug 20
R
R_A_TOV 47
default value 116
greater than E_D_TOV 47
rack mount
checklist 25
installing brackets 26
installing the switch 28
required tools 26
slide rails 26
rack stability, warning 11
rack types 25
RADIUS server
configure
HAFM Basic 87
description 87
rails
and brackets 26
mounting 26
recycling, battery 104
recycling, Taiwan EPA battery 104
regulatory compliance
information number 100
notices 99
BSMI 102
Class A 99
Class B 99
European Union 102
HP series number 100
Japan 103
Korean 103
lasers 100