FW 08.01.00/HAFM SW 08.06.xx or later HP StorageWorks Edge Switch 2/24 Installation Guide (AA-RTDWE-TE, November 2005)
Table Of Contents
- Edge Switch 2/24 installation guide
- Contents
- Introduction to the Edge Switch 2/24
- Installing the Edge Switch
- Connecting the Edge Switch
- Edge Switch network addresses
- LAN-connecting the Edge Switch
- Setting up the HAFM appliance
- Using HAFM to configure the Edge Switch
- Setting the Edge Switch online and offline
- Configuring Edge Switch identification
- Configuring Edge Switch operating parameters
- Configuring fabric operating parameters
- Configuring switch binding
- Configuring preferred path
- Configuring ports
- Configuring SNMP trap message recipients
- Configuring, enabling, and testing e-mail notification
- Configuring and enabling call-home features
- Configuring and enabling Ethernet events
- Configuring, enabling, and testing call-home event notification
- Threshold alerts
- Creating new alerts
- Figure 30 Configure Threshold Alerts dialog box
- Figure 31 New Threshold Alerts dialog box-first screen
- Figure 32 New Threshold Alerts dialog box-second screen
- Figure 33 New Threshold Alerts dialog box-third screen
- Figure 34 New Threshold Alerts dialog box-summary screen
- Figure 35 Configure Threshold Alerts dialog box-alert activated
- Modifying alerts
- Activating or deactivating alerts
- Deleting alerts
- Creating new alerts
- Configuring SANtegrity Authentication
- Backing up HAFM configuration data
- Resetting configuration data
- Enabling the HAFM Basic interface
- Enabling Telnet
- Connecting the Edge Switch to a fabric
- Using the HAFM Basic interface
- Launching the HAFM Basic interface
- Setting the Edge Switch offline and online
- Configuring Edge Switch ports
- Configuring BB credit
- Configuring Edge Switch identification
- Configuring date and time
- Configuring Edge Switch parameters
- Configuring network information
- Configuring SNMP trap message recipients
- Enabling or disabling the CLI
- Configuring zoning
- Managing firmware versions
- Regulatory compliance and safety
- Technical specifications
- Index
Edge Switch 2/24 installation guide 121
Index
A
access control list
configure
HAFM Basic 87
description 87
accumulators 104
active zone set state, default value 117
addresses, default values 116
alkaline battery warning 104
asynchronous RS-232 null modem cable 21
audience 9
authentication
access control list 87
configure
HAFM Basic 87
RADIUS server support 87
settings 87
authentication settings
configure
HAFM Basic 87
description 87
authorized reseller, HP 11
B
backing up switch configuration file 97
batteries
recycling or disposal 104
replacement
notice 103
warning 104
Taiwan EPA recycling and disposal 104
beaconing, introduction 15
binding
fabric
configure through HAFM Basic 87
enable through HAFM Basic 87
Enterprise Fabric Mode 87
port
configure through HAFM Basic 87
enable through HAFM Basic 87
switch
configure through HAFM Basic 87
enable through HAFM Basic 87
binding, port 88
boot straps, using 105
brackets
and rails 26
mounting 26
BSMI, regulatory compliance notice 102
C
cables
FCC compliance statement 100
shielded 100
call-home feature
introduction 15
overview 55
certification and classification information, laser
101
checklist, rack mount 25
Class A equipment, Canadian compliance
statement 101
Class B equipment, Canadian compliance statement
102
command line interface
description 14
disable using HAFM Basic 82
enable using HAFM Basic 82
configuration data, backing up 63
configure
access control list
HAFM Basic 87
authentication settings
HAFM Basic 87
Enterprise Fabric Mode
HAFM Basic 87
Ethernet events 55
fabric binding
HAFM Basic 87
Fabric Parameters dialog box 46
ISL performance features 86
PFE keys 84