24 Installation Guide (AA-RTDWE-TE, November 2005)

Table Of Contents

Edge Switch 2/24 installation guide 101

Laser safety warning

WARNING! To reduce the risk of exposure to hazardous radiation:

• Do not try to open the laser device enclosure. There are no user-serviceable components inside.

• Do not operate controls, make adjustments, or perform procedures to the laser device other than

those specified herein.

• Allow only HP-authorized service technicians to repair the laser device.

Certification and classification information

This product contains a laser internal to the fiber optic (FO) transceiver for connection to the Fibre

Channel communications port.

In the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements

contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter

J. A label on the plastic FO transceiver housing indicates the certification.

Outside the USA, the FO transceiver is certified as a Class 1 laser product conforming to the

requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment

11:1996 and Amendment 2:2001.

Laser product label

The optional label in Figure 61 or equivalent may be located on the surface of the HP supplied laser

device.

Figure 61 Class 1 laser product label

International notices and statements

Canadian notice (avis Canadien)

Class A equipment

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.

This optional label indicates that the product is classified as

a CLASS 1 LASER PRODUCT. This label may appear on the

laser device installed in your product.