FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

2
Installation Tasks
2-49
Installation Tasks
Task 13: Configure the Product to the Management Application
To manage a new product, it must be identified to and discovered by
the SAN management application. To identify the product:
1. At the SANavigator or EFCM main window, select Setup from the
Discover menu. The Discover Setup dialog box displays.
2. Click Add. The Address Properties dialog box displays with the IP
Address page open by default (Figure 2-24).
Figure 2-24 Address Properties Dialog Box (IP Address Page)
3. Type a product description in the Description field.
4. Type the product IP address (determined by the customer) in the
IP Address field.
5. Type the product subnet mask (determined by the customer) in
the Subnet Mask field.
6. Click OK to save the entered information and define the switch to
the SAN management application. Close all dialog boxes and
return to the SANavigator or EFCM main window.