FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

2
Installation Tasks
2-45
Installation Tasks
1. At the Windows desktop, click Start at the left side of the task bar
(bottom of the desktop), then sequentially select Settings, Control
Panel, and Date/Time. The Date/Time Properties dialog box displays
with the Date & Time page open.
NOTE: The Time Zone field must be set before the Date & Time field.
2. Click the Time Zone tab. The Date/Time Properties dialog box
displays with the Time Zone page open (Figure 2-21).
Figure 2-21 Date/Time Properties Dialog Box (Time Zone Tab)
3. To change the time zone:
a. Select the appropriate time zone from the drop-down list at
the top of the dialog box.
b. If instructed by the customer, select the Automatically adjust
clock for daylight saving changes check box.
c. Click Apply. Record time zone and daylight savings
information for reference if the server hard drive fails and
must be restored.
4. Click the Date & Time tab. The Date/Time Properties dialog box
displays with the Date & Time page open (Figure 2-22).