FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

2
Installation Tasks
2-37
Installation Tasks
Configure Private
LAN Addresses
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left, and the
button to move the cursor right, input the default or changed
password, and press ENTER. The LAN 1 Setting?? message
appears at the LCD panel.
3. Press the button. The LAN 2 Setting?? message appears at the
LCD panel. Press ENTER and the default IP address of 10.1.1.1
appears.
4. Use the arrow keys as described in step 2 to input a new IP
address, then press ENTER. A Save Change? Yes, Save!! message
appears.
5. Press ENTER. The LAN 2 IP address changes and the default
subnet mask of 255.0.0.0 appears.
6. Use the arrow keys as described in step 2 to input a new subnet
mask, then press ENTER. A Save Change? Yes, Save!! message
appears.
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the panel returns to the LAN 1 Setting?? message, and the
LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for reference
if the server hard drive fails and must be restored.
Configure Public
LAN Addresses
(Optional)
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left, and the
button to move the cursor right, input the default or changed
password, and press ENTER. The LAN 1 Setting?? message
appears at the LCD panel.