FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

2
2-14
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
Configure Date and
Time
Perform this procedure to configure product date and time.
1. Select Switch and Date & Time from the Configure menu at any
view. The Date Time View displays (Figure 2-5).
Figure 2-5 Date Time View
a. Click Date fields that require change, and type numbers in the
following ranges:
•Month (MM): 1 through 12.
•Day (DD): 1 through 31.
•Year (YYYY): greater than 1980.
b. Click Time fields that require change, and type numbers in the
following ranges:
•Hour (HH): 0 through 23.
•Minute (MM): 0 through 59.
• Second (SS): 0 through 59.
2. Click OK to save and activate changes.
Configure
Parameters
Perform this procedure to configure product operating parameters.
1. Set the product offline. Refer to Set Online State for instructions.
2. Select Switch and Parameters from the Configure menu at any view.
The Parameters View displays (Figure 2-6).
a. At the Insistent Domain ID field, check (enable) or uncheck
(disable) the parameter. When enabled, the value configured
in the Preferred Domain ID field becomes the active domain ID
when the fabric initializes.