FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

1
1-14
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
General Information
Tools Supplied with
the Product
The following tools are supplied with the product:
• Door key - A door key with 5/16-inch socket (Figure 1-5) is
required to open front and rear doors of the Fabricenter
Equipment Cabinet. A 5/16-inch socket wrench may also be used.
Figure 1-5 Door Key
• Loopback plug - A multimode (shortwave laser) or singlemode
(longwave laser) loopback plug (Figure 1-6) is required to
perform port diagnostic tests. Loopback plugs are shipped with
the product, depending on the types of port transceivers installed.
Figure 1-6 Loopback Plug
• Fiber-optic protective plug - For safety and port transceiver
protection, fiber-optic protective plugs (Figure 1-7) are inserted in
all product ports without fiber-optic cables attached. Products are
shipped with protective plugs installed.
Figure 1-7 Fiber-Optic Protective Plug