FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

5-8
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Removal and Replacement Procedures
Figure 5-2 Redundant Power Supply Removal and Replacement
5. Inspect the Event Log:
— At a web browser communicating with the EFCM Basic
Edition interface, select Event from the Logs menu.
— At the management server (Element Manager application),
select Event Log from the Logs menu.
The following event codes appear:
• 200 - Power supply AC voltage failure (recorded when power
is disconnected).
• 206 - Power supply removed.
• 300 - Cooling fan propeller failed.
Replacement To replace a redundant power supply:
1. Remove the replacement power supply from its packaging.
2. Inspect the rear of the power supply for bent or broken connector
pins damaged during shipping. If any pins are damaged, obtain a
new power supply.