FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

Repair Information
4-37
Repair Information
Figure 4-14 Port Diagnostics Dialog Box
6. Click Start Test. The test begins and:
a. The Start Test button changes to a Stop Test button.
b. The message Port xx: TEST RUNNING appears.
c. A red progress bar (indicating percent completion) travels
from left to right across the Completion Status field.
7. When the test completes, results appear as Port xx: Passed! or
Port xx: Failed! in the message area of the dialog box.
8. When finished, click Cancel to close the Port Diagnostics dialog
box.
9. Reset the port:
a. At the Hardware View, right-click the port graphic. A pop-up
menu appears.
b. Select Reset Port. A message box displays, indicating a link
reset will occur.
c. Click OK. The port resets.
10. Inform the customer the test is complete and the attached device
can be set online.