FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

Maintenance Analysis Procedures
3-31
Maintenence Analysis Procedures
4
A connection is not allowed because of a conflict with the configured
port type. An expansion port (E_Port) is cabled to a Fibre Channel
device or a fabric port (F_Port) is cabled to a director or fabric switch.
a. For the product reporting the problem:
— EFCM Basic Edition - Select Ports and Basic Info from the
Configure menu at any view. The Basic Information View
displays.
— Element Manager - Select Ports from the Configure menu
at any view. The Configure Ports dialog box displays.
b. If necessary, use the vertical scroll bar to display the information
row for the port indicating an invalid attachment.
c. Select (click) the Type field and configure the port as follows:
• Select fabric port (F_Port) if the port is cabled to a device.
• Select expansion port (E_Port) if the port is cabled to a
director or switch (ISL).
d. Click OK or Activate.
08 E_Port capability disabled. Go to step 7.
0A Unauthorized port binding WWN. Go to step 2.
0B Unresponsive node. Go to step 8.
0C ESA security mismatch. Go to step 10.
0D Fabric binding mismatch. Go to step 11.
0E Authorization failure reject. Go to step 8.
0F Unauthorized switch binding WWN. Go to step 10.
10 Authentication failure Go to step 12.
11 Fabric mode mismatch. Go to step 5.
Table 3-11 Invalid Attachment Reasons and Actions (Continued)
Byte 4 Invalid Attachment Reason Action