FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

Maintenance Analysis Procedures
3-25
Maintenence Analysis Procedures
b. Ensure the incorrect product (to be deleted) is moved from the
Selected Individual Addresses list to the Available Addresses
list. Select (highlight) the product and click Delete. The product
is deleted.
c. Click Add. The Address Properties dialog box displays with the
IP Address page open.
d. Type a product description in the Description field.
e. Type the product IP address (determined by the network
administrator) in the IP Address field.
f. Type the product subnet mask (determined by the network
administrator) in the Subnet Mask field.
g. Click the Product Type and Access tab. Select Switch from the
Product Type drop-down list and type customer-specified values
in the User ID, Password, and Retype Password fields.
h. Click OK to close the dialog box and define the new product
configuration to the SAN management application.
i. Click OK to close the Discover Setup dialog box.
Was the maintenance action successful?
NO YES
↓ The management server connection is restored. Exit MAP.
Contact the next level of support. Exit MAP.
MAP 0400: FRU Failure Analysis
This MAP describes fault isolation for product FRUs. The failure
indicator is:
• Illumination of the associated amber LED.
• Event code 300, 301, 302, 303, 304, 305, 370, 426, 433, 440, 810,
811, 812, or 850 observed at the Event Log (EFCM Basic Edition or
Element Manager interface).