FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

2
2-74
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Installation Tasks
NOTE: The default Windows user name is Administrator and the
default password is password. Both are case-sensitive.
g. Type the SAN management application default user ID and
password and select a server or IP address from the Network
Address drop-down list.
NOTE: The default user ID is Administrator and the default
password is password. Both are case-sensitive.
6. Click Login. The application opens and the SANavigator or EFCM
main window appears.
7. Remove the base restore CD from the CD-RW drive and store in a
safe location. Insert a blank rewritable CD into the CD-RW drive
and format the CD. Refer to step 1 for formatting instructions.
8. Go to Task 21: Cable Fibre Channel Ports.
Task 21: Cable Fibre Channel Ports
Perform this task to cable Fibre Channel ports and connect devices:
1. Route fiber-optic jumper cables from customer-specified Fibre
Channel devices, FC-AL devices, or fabric elements to product
ports.
2. Connect device cables to SFP optical port transceivers as directed
by the customer.
3. Perform one of the following:
• If the product is installed on a table or desktop, bundle and
secure Fibre Channel cables as directed by the customer.
• If the product is installed in a customer-supplied equipment
rack, bundle Fibre Channel cables from the product and other
equipment (groups of 16 maximum), and secure them as
directed by the customer.
• If the product is installed in a Fabricenter equipment cabinet,
bundle Fibre Channel cables from the product and other
equipment (groups of 16 maximum), and secure them in the
cable management area at the front-left side of the cabinet.