FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

2
Installation Tasks
2-65
Installation Tasks
• Transmit - An alert occurs if the threshold value for transmit
throughput is reached or exceeded.
• Receive and Transmit - An alert occurs if the threshold value
for either throughput is reached or exceeded.
5. Click Next. The New Threshold Alert dialog box (screen 2) displays
(Figure 2-34).
Figure 2-34 New Threshold Alert Dialog Box (Screen 2)
6. Type a value from 1 through 100 in the % utilization field. When
throughput reaches the specified percentage of port capacity, a
threshold alert occurs.
7. Enter the cumulative minutes for which the % utilization should
exist during the notification interval before an alert is generated.
Select the At any time radio button to specify that an alert occur
when the % utilization is reached. The valid range is 1 to the
interval set in the following step.
8. Enter the interval (in minutes) during which throughput is
measured and threshold notifications can occur. The valid range
is 5 through 70560 minutes.
9. Click Next. The New Threshold Alert dialog box (screen 3) displays
(Figure 2-35).