FW 08.01.00 McDATA E/OS SNMP Support Manual (620-000131-630, November 2005)

B
B-36
E/OS SNMP Support Manual
FC Management MIB
Description Each entry contains information on a specific event for the given
connectivity unit.
INDEX { connUnitEventUnitId, connUnitEventIndex }
Sequence
::= { connUnitEventTable 1 }
ConnUnitEventEntry ::=
SEQUENCE {
connUnitEventUnitId
Syntax FcGlobalId
Access read-only
Status mandatory
Description The connUnitId of the connectivity unit that contains this event table.
Sequence
::= { connUnitEventEntry 1 }
connUnitEventIndex
Syntax INTEGER (1..2147483647)
Access read-only
Status mandatory
Description Each connectivity unit has its own event buffer. As it wraps, it may
write over previous events. This object is an index into the buffer. It is
recommended that this table be read using 'getNext's to retrieve the
initial table. The management application should read the event table
at periodic intervals and then determine if any new entries were
connUnitEventUnitId FcGlobalId,
connUnitEventIndex INTEGER (1..2147483647),
connUnitEventId INTEGER,
connUnitREventTime DisplayString,
connUnitSEventTime TimeTicks,
connUnitEventSeverity FcEventSeverity,
connUnitEventType INTEGER,
connUnitEventObject OBJECT IDENTIFIER,
connUnitEventDescr DisplayString }