FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

1
1-26
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
General Information
• Cross-tip (#2 Phillips) screwdriver - The screwdriver is required
to rack-mount the switch or to remove, replace, adjust or tighten
various chassis or cabinet components.
• T10 Torx
®
tool - The tool is required to rack-mount the switch or
to remove, replace, adjust or tighten various chassis or cabinet
components.
• Maintenance terminal (desktop or notebook PC) - The PC is
required to configure switch network addresses and acquire
event log information through the maintenance port. The PC
must have:
— The Microsoft Windows 98, Windows
2000, Windows 2003,
Windows XP, or Millennium Edition operating system
installed.
— RS-232 serial communication software (such as ProComm
Plus™ or HyperTerminal) installed. HyperTerminal is
provided with Windows operating systems.
• Fiber-optic cleaning kit - The kit contains tools and instructions
to clean fiber-optic cable, connectors, loopback plugs, and
protective plugs.