FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

D-10
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Figure D-12
Discover Setup Dialog Box
b. Click Add. The Domain Information dialog box displays
with the IP Address page open by default (Figure D-13 on
page D-11).
c. Type a switch description (Sphereon 4500, for example) in
the Description field.
d. Type the switch IP address (determined by the customer’s
network administrator) in the IP Address field.
e. Type the switch subnet mask (determined by the customer’s
network administrator) in the Subnet Mask field.
f. At the Data Source for Domain area of the dialog box, select the
Use auto detection, Use the server, or Use a specific RDC radio
button (determined by the customer’s network administrator).
g. Click OK to save the entered information, close the dialog box,
and define the switch to the SAN management application.