FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Consolidating EFC Servers
D-9
4. Ensure each Sphereon 4500 Switch has a unique IP address.
a. Change the IP address of a switch through the maintenance
port at the rear of the switch chassis (Task 5: Configure Switch
Network Information (Optional) on page 2-41).
b. If the IP address is changed at a switch, the IP address must
also be changed at the SAN management application
(management server) (Task 13: Configure the Switch to the
Management Application on page 2-76).
After performing the preceding steps, Figure D-11 shows unique
IP addresses for all servers and switches.
Figure D-11 IP Addresses in a Multiswitch Environment (After Consolidation)
5. Define all switches formerly managed by client backup PCs to the
management server. Repeat this step for all switches defined to
the management server.
a. At the SAN management application (SANavigator or EFCM
main window), select the Setup option from the Discover menu.
The Discover Setup dialog box displays (Figure D-12 on
page D-10).