FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

v
Contents
Contents
Change Default Administrator Password........................... 2-64
Add a New User...................................................................... 2-65
Change User Properties ......................................................... 2-67
Task 10: Set Management Server Date and Time....................... 2-69
Task 11: Configure the Call-Home Feature (Optional) ............. 2-71
Task 12: Assign User Names and Passwords............................. 2-72
Task 13: Configure the Switch to the Management Application.....
2-76
Task 14: Record or Verify Server Restore Information.............. 2-78
Task 15: Verify Switch-to-Server Communication..................... 2-80
Task 16: Configure PFE Key (Optional) ...................................... 2-82
Task 17: Configure Management Server (Optional).................. 2-86
Task 18: Set Switch Date and Time .............................................. 2-86
Task 19: Configure the Sphereon 4500 Element Manager
Application...................................................................................... 2-88
Configure Switch Identification............................................ 2-89
Configure Switch Parameters................................................ 2-90
Configure Fabric Parameters................................................. 2-92
Configure Preferred Paths ..................................................... 2-94
Configure Switch Binding ..................................................... 2-96
Configure Switch Ports ........................................................ 2-101
Configure SNMP Trap Message Recipients ...................... 2-103
Configure Threshold Alerts................................................. 2-105
Configure OpenTrunking .................................................... 2-109
Enable SANpilot Interface and Telnet Access................... 2-112
Configure, Enable, and Test E-mail Notification.............. 2-112
Configure and Enable Ethernet Events.............................. 2-114
Configure, Enable, and Test Call-Home Event Notification.....
2-114
Task 20: Back Up Configuration Data ....................................... 2-115
Task 21: Cable Fibre Channel Ports ........................................... 2-120
Task 22: Configure Zoning (Optional) ...................................... 2-121
Configure Zones (SANpilot Interface)............................... 2-121
Configure Zone Sets (SANpilot Interface)......................... 2-124
Task 23: Connect Switch to a Fabric Element (Optional)........ 2-125
Task 24: Register with the McDATA File Center ..................... 2-127
Chapter 3 Diagnostics
Maintenance Analysis Procedures................................................. 3-1
Factory Defaults ........................................................................ 3-1
Quick Start ................................................................................. 3-2
MAP 0000: Start MAP...................................................................... 3-6