FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

C-2
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
• SAN Management data directory backup on CD-ROM - The
SAN management data directory is automatically backed up to a
CD when the management server is rebooted or when the data
directory contents change. The data directory includes:
— All configuration data (product definitions, user names,
passwords, user rights, nicknames, session options, simple
network management protocol (SNMP) trap recipients,
E-mail recipients, and Ethernet event notifications).
— All log files (SAN management application logs and
individual Element Manager logs).
— Zoning library (all zone set and zone definitions).
— Firmware library.
— Call-home settings.
— Configuration data for each managed Sphereon 4500
Switch (stored on the management server and in NV-RAM
on each switch).
• Windows 2000 configuration information - Windows 2000
network addresses, date and time information, user information,
and the product identification are recorded during installation of
the management server. Refer to Task 14: Record or Verify Server
Restore Information on page 2-78 for information.
Restore Management Server Procedure
To restore the rack-mount management server:
1. At the management server, press the left edge (PUSH label) of the
LCD panel to disengage the panel and expose the CD-RW drive.
2. Insert the Management Server Restore CD-ROM in the CD-RW
drive and close the LCD panel.
ATTENTION ! This procedure deletes all data from the C: hard
drive partition.
3. Press the power ( ) button. The server powers on and performs
the restore process from the CD-ROM.