FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

A-24
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Message Resource is unavailable.
Description The specified operation cannot be performed because the switch is
unavailable.
Action Verify the switch-to-management server link is operational. If the link
is up, the management server may be busy. Try the operation later.
S
Message Send firmware failed.
Description A send firmware operation failed.
Action Retry the operation. If the condition persists, contact support
personnel and report the problem.
Message SNMP Trap address not defined.
Description An SNMP trap address must be defined if a community name is
defined.
Action Define an SNMP address.
Message Stop diagnostics failed. The test is already running.
Description Diagnostics for the port were not running and Stop was selected at
the Port Diagnostics dialog box. Diagnostics aborted for some reason,
but the Stop button remains enabled.
Action Verify port operation. Retry diagnostics for the port and select Stop
from the dialog box. If the condition persists, contact support
personnel and report the problem.
Message Stop diagnostics failed. The test was not running.
Description The action to stop diagnostics failed because the test was not running.
Action Information message - no action required.
Message Switch binding was removed from attached devices that are also
participating in port binding. Please review the port binding
configuration.