FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Messages
A-17
Message Invalid port number. Valid ports are (0-< nn >).
Description You have specified an invalid port number.
Action Specify a valid port number, in the range 0 to the maximum number
of ports on the product minus one. For example, for a switch with 24
ports, the valid port range is 0 to 23.
Message Invalid response received from switch.
Description An error occurred and the switch returned an invalid response.
Action Resend the firmware. If the condition persists, contact support
personnel and report the problem.
Message Invalid serial number for this feature key.
Description The switch serial number and entered feature key do not match.
Action Ensure the entered feature key corresponds to the switch serial
number.
Message Invalid UDP port number.
Description The user datagram protocol (UDP) port number must be an integer
from 1 through 65535.
Action Enter a port number from 1 through 65535.
Message Invalid value for BB_Credit.
Description The BB_Credit value must be an integer from 1 through 60.
Action Enter a BB_Credit value from 1 through 60.
Message Invalid value for Low BB Credit threshold (1-99) %.
Description Low BB Credit Threshold text field in Configure Open Trunking dialog
box must have entries in the range from 1 and 99. This message only
displays if the optional Open Trunking feature is installed. Note that
your message and the Configure Open Trunking dialog box may
display Credit Starvation Threshold instead of Low BB Credit Threshold.