FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

A-14
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Message Error transferring files < message >.
Description An error occurred while transferring files from the PC hard drive to
the Element Manager application. The message varies, depending on
the problem.
Action Retry the operation. If the condition persists, contact support
personnel and report the problem.
F
Message Feature not supported. The Product Name must be running version
05.00.00 or higher.
Description The Enterprise Operating System (E/OS) version running on the
switch is lower than Version 05.00.00. This message displays only if
the optional OpenTrunking feature is installed.
Action Install E/OS Version 5.00.00 or higher.
Message Field cannot be blank.
Description The data field requires an entry and cannot be left blank.
Action Enter appropriate information in the data field.
Message Field has exceeded maximum number of characters.
Description The maximum number of characters allowed in a data entry field was
exceeded.
Action Enter information using the allowed number of characters.
Message File transfer aborted.
Description The user aborted the file transfer process.
Action Verify the file transfer is to be aborted, then click OK to continue.
Message File transfer is in progress.
Description Firmware or data collection information is being transferred.
Action Information message - no action required.