FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

Messages
A-11
D
Message Date entered is invalid.
Description The date is entered incorrectly.
Action Verify the number of days in the month entry is valid.
Message Device applications should be terminated before starting
diagnostics. Press NEXT to continue.
Description A device application is not terminated.
Action Terminate the device application before running port diagnostics.
Message [device WWN] cannot be removed from the switch membership list
while participating in switch binding. The device must be isolated
from the switch, or switch binding deactivated before it can be
removed.
Description A user attempted to remove a device WWN from the switch
membership list (SANtegrity binding feature) with switch binding
enabled.
Action Disconnect the device by blocking the switch port and setting the
switch offline, or disable switch binding through the Switch Binding
Change State dialog box before removing devices from the switch
membership list.
Message Disabling Insistent Domain ID will disable fabric binding. Do you
want to continue?
Description Fabric binding is enabled through the SAN management application
and a user attempted to disable the Insistent Domain ID parameter at
the Configure Switch Parameters dialog box.
Action Click Yes to continue and disable fabric binding.
Message Disabling switch binding will disable Enterprise Fabric Mode. Do
you want to continue?
Description A user attempting to disable switch binding through the Switch
Binding State Change dialog box, but Enterprise Fabric Mode is enabled.