FW 07.00.00/HAFM SW 08.06.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-320, April 2005)

A-10
McDATA Sphereon 4500 Fabric Switch Installation and Service Manual
Message Could not export log to file.
Description A log file I/O error occurred and the file could not be saved to the
specified destination. The disk may be full or write protected.
Action If the disk is full, use another disk. If the disk is write protected,
change the write-protect properties or use another disk.
Message Could not find firmware file.
Description Firmware file selected was not found in the file transfer protocol
(FTP) directory.
Action Ensure the file name and directory are correct and retry the operation.
Message Could not remove dump files from server.
Description Dump files could not be removed from the server. The link may be
down or the switch may be busy.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.
Message Could not stop port diagnostics.
Description Port diagnostics could not be stopped. The link may be down or the
switch may be busy.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.
Message Could not write firmware to flash.
Description Firmware could not be written to flash memory.
Action Retry the operation later. If the condition persists, contact support
personnel and report the problem.